5A05 aluminum plate for the Al-Mg Department of rust-proof aluminum alloy, heat treatment can not be strengthened, alloy cold deformation can improve strength. The plasticity of the annealed state is higher, and the ductility of the semi-cold hardened state is acceptable. Good corrosion resistance of the alloy, welding is acceptable for spot welding, atomic hydrogen welding, gas welding, welding. The cutting process, semi-cold hardening state is still good.
Application
Armor plate, high-strength structural parts, welded pipes, fuel tanks
Features
- 5A05 aluminum cold deformation strength, high plastic state annealing, and low strength, good corrosion resistance and weldability.
- Semi-cold work hardening state of good cutting.
- The surface of aluminum plate without skin, bubbles, surface roughness and local mechanical damage, aluminum surface without defects.
Specification
MOQ：3Ton
| Typical alloys | Material status | thickness（mm） | width（mm） | length（mm） | Typical products |
| 5A05 aluminum plate | O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 | 0.15-600 | 300-1600 | 800-6000 | Ship traffic vehicles sheet metal parts, fuel tanks, flanges, and so on |
Workshop
Inspection
Certificates
Stay Connect