Application
- Aluminum 600V URD cable is designed for use in secondary distribution circuits, where installed in duct or direct burial applications.
- Maximum operating temperature is not to exceed 90°C in wet and dry locations.
- Voltage rating is 600 volts.
- As an option, this cable can provided pre-pulled into duct.
Product Features
- Heat, ozone, oil, and chemical resistant.
- Tear and abrasion resistant.
- Individual cables are UL Listed as USE-2.
- RUS accepted.
Our Advantage
- Meticulous quality control from material choosing to specific diameter drawing as well as insulation wrapping.
- Massive production offer you competitive price.
- Free sample and OEM.
Standards
Quadruplex service drop cable meets or exceeds the following specifications:
- ASTM – B230 Aluminum Wire, 1350-H19 for Electrical Purposes.
- ASTM – B231 Aluminum Conductors, Concentric-Lay-Stranded.
- ASTM – B609 Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
- ASTM – B786 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
- ASTM – B-901 Compressed Round Stranded Aluminum Conductors Using Single Input Wire.
- USE-2 per UL 854 available upon request
- Federal Specification J-C–30B
- RUS ACCEPTED
Construction
- Conductors are stranded, compressed 1350-H16/H26 aluminum.
- Phase conductors in black cross-linked polyethylene (XLPE).
- Neutral conductor identified by yellow striping or full yellow jacket.
- Three phase conductors and one neutral conductor are cabled together to produce the quadruplex cable configuration.
Specifications
- Insulated conductors surface printed, neutral triple yellow striped.
- Three phase and one neutral conductor cabled together (LH lay) or parallel if so specified.
- Black neutrals may be specified if desired.
- Cable in Duct (CIC).
- Abrasion Resistant.
- They can be offered in single, duplex, triplex.
- Popular specification and codes in ASTM standards: Tulsa, Dyke, Wittenberg, Notre Dame, Purdue, Syracuse, Lafayette, Swarthmore, Davidson, Wake Forest, Earlham, Slipperyrock, Wofford, Westminster.. Equivalent standards like DIN, BS, IEC also available.
- Rare specifications or producing by your sample can also be full filled.
Please contact for fast quotation or stock status check, our service team is standby for instant response.
Process
- Quadruplex Aluminum Conductor 600V 1Kv Urd Cable - ACS manufacture main process contains more than 10 sub-processes and every main process has a quality gateway.
- Main core processes containers the following procedures as Raw Material Inspection, Conductor Drawing, Conductor Stranding, Insulation Extrusion, Multi-cores Cabling, Qualified Finished Cable in Storage, Package etc.
- We have ZERO tolerate for flaw products, quality you can trust.
- Factory and capacity has been verified by Bureau Veritas as well as a series of inspections including CCC, ISO, OHSAS etc.
- Third-party inspection is welcomed, we are happy to cooperate.
Package
- Finished Quadruplex Aluminum Conductor 600V 1Kv Urd Cables are rolled to steel/wooden reels, some called drum or spool, which can be easily load into shipping container and unpacked for on-site installation.
- Drum/Spool are covered with plastic film for water-proof and sealed with pined slabs.
- Outer surface of reel/drum is reinforced with steel strip for additional strength.
- Our package measures are more than solid for overseas shipping.
- Package Diameter of Reel/Drum can vary with your requirement, both steel and wood available.
Stay Connect