Sheets - Plates - Strips

1050 is a pure aluminum plate in a product, according to international brand naming principles, aluminum content must reach 99.5% above qualified products, because it does not contain other technical elements, so the production process is relatively simple, 1050 aluminum price is relatively cheap,...

1060 aluminum plate with 99.6% aluminum content, likewise referred to as pure aluminum, 1060 aluminum has great prolongation and tensile toughness, totally able to satisfy the standard handling demands (stamping, extending) high formability. 1060 aluminum for the industrial aluminum, with high...

1070 aluminum plate with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity characteristics of good, but low strength, not through the heat treatment to strengthen, cutting is not good, acceptable contact welding, gas welding. The use of its advantages to create...

1100 aluminum for the industrial aluminum, aluminum content (mass fraction) of 99.00%, not heat treatment to strengthen. With high corrosion resistance, electrical conductivity and thermal conductivity, the density is small, good plasticity, through the pressure processing can produce all kinds of...

Alloy 2011 is known as a free machining alloy or 'FMA' - this means that the material has excellent machinability and is suitable for use on automatic lathes. The alloy displays poor corrosion resistance and therefore anodising will be required for additional surface protection. Whilst weldability...

Grade 2014A is a high strength aluminium alloy which retains its strength after heat treatment. It is a 4 - 5% copper alloy and is supplied in the fully heat-treated condition (solution heat treated & artificially aged). The material offers very good machinability and is used widely in the...

Alloy 2024 is one of the more prominent aluminium alloys. Due to the alloys good fatigue resistance, especially in thick plate form, the material is specified for use in the aerospace and military sector in fuselage applications in such areas as structures and wing tension members. With improved...

Aluminium Alloy for use in Moderately Elevated Temperatures 2124 Aluminium Alloy is a higher purity form of 2024 and was developed specifically for elevated temperature applications. The aerospace sector is a primary market for this alloy as fracture toughness of the material is guaranteed, and can...

2219 Aluminium is a high strength alloy used in high temperature structural applications including space boosters and fuel tanks. The alloy benefits from good mechanical properties combined with good machinability. With good fracture toughness the alloy is useful over a temperature range of -452°...

2618A - a strong aluminium alloy containing nominally 2% copper and 1.5% magnesium. The alloy is produced as bar, plate, tube and is also available as clad sheet and strip. Solution treated and artificially aged to achieve the T6 condition or with the addition of controlled stretching to achieve...

3003 aluminum is a typical Al-Mn alloy, this material has good formability, very good corrosion resistance and weldability, commonly used in the production of lightweight cars in the power battery case, cooking utensils, food storage devices, transportation equipment Cans, silos, sheet metal...

3004 aluminum is also a series of AL-Mn alloy, strength than 3003 aluminum, formability, solubility, good corrosion resistance, requiring higher strength than the 3003 alloy parts.

3005 belongs to Al-Mg alloy, 3005 aluminum plate strength of about 20% higher than the 3003 aluminum, corrosion is also better. 3 series aluminum can also be called anti-rust aluminum, 3 series aluminum production process is more excellent. 3 series aluminum plate is composed of manganese element...

3104 aluminum is a series of AL-Mn alloy, it is a deformation of aluminum alloy, the main state is H111 / 0 / H14 / H16 / H18 / H34, tensile maximum control can be greater than or equal to 275MPA, elongation of up to 20% ; 3104 alloy aluminum plate has good deep drawing performance, suitable for...

3105 aluminum is a series of AL-Mn alloy, good corrosion resistance, good electrical conductivity, aluminum content of which 98%, due to the addition of 0.3% of the copper element, the conductivity of up to 41%; 3105 aluminum Heat treatment to strengthen, so the use of cold processing methods to...

3A21 aluminum plate is Al-Mn alloy, 3A21 aluminum is a widely used anti-rust aluminum, the strength is not high (only slightly higher than the industrial aluminum), can not be heat treatment strengthening, so often cold processing methods to improve its mechanical properties; State of high...

5052 aluminum alloy is Al-Mg alloy, cold workability, good molding processability, corrosion resistance, 5052 alloy is the most widely used of a rust-proof aluminum, the strength of this alloy is high, especially with fatigue strength , Plasticity and high corrosion resistance, hardening in the...

5083 belongs to the Al-Mg-Si system alloy, the use of a wide range. 5083 aluminum is the application of high-end aluminum industry, with the rapid development of the domestic rail transport market, as well as the arrival of the global automotive era, has a huge market prospect. According to the...

5182 belongs to Al-Mg-Si alloy, the use of a wide range, especially in the construction industry can not do without this alloy is the most promising alloy. Good corrosion resistance, good weldability, good cold workability, and with moderate strength. 5182 of the main alloying elements of magnesium...

5454 anti-rust aluminum than the 5052 aluminum plate about 20% higher, its characteristics and 5154 roughly the same, but in the fierce environment under the corrosion resistance than 5154 good.

5754 aluminum alloy with moderate strength, excellent processing performance, good corrosion resistance, weldability and easy processing and forming characteristics, Al-Mg alloy is a typical alloy. 5754 aluminum alloy sheet of different heat treatment state is the main material used in the...

5A02 aluminum plate for the Al-Mg Department of rust-proof aluminum alloy, not heat treatment to strengthen. The low magnesium content of the alloy, its high plasticity, good formability, cold deformation can improve its strength. Good corrosion resistance of the alloy, suitable for use in marine...

5A05 aluminum plate for the Al-Mg Department of rust-proof aluminum alloy, heat treatment can not be strengthened, alloy cold deformation can improve strength. The plasticity of the annealed state is higher, and the ductility of the semi-cold hardened state is acceptable. Good corrosion resistance...

5A06 alloy is a high magnesium alloy, AL-Mg Department of rust-proof aluminum, 5A06 aluminum alloy has high strength and corrosion resistance, in the annealed and extruded state plasticity is still good. Welding with TIG welding, gas tightness and weld plastic can still be, gas welding and spot...

6005 aluminum is Al-Mg alloy, is the most widely used of a rust-proof aluminum, the use of a wide range of alloys, especially in the construction industry is inseparable from the alloy, is the most promising alloy, can not heat treatment can be polished.

6061 aluminum plate belongs to 6 series aluminum magnesium silicon alloy products, is the heat treatment pre-stretching process made of high-quality aluminum alloy, 6061 aluminum alloy in the main elements of magnesium and silicon. T61, T6, and T651 are the common states of the 6061 aluminum plate...

6063 alloy aluminum plate for the Al-Mg-Si high plasticity alloy, with excellent processing performance, excellent weldability, extrusion and plating, good corrosion resistance, toughness, easy polishing, the coating, anodizing The effect is excellent, is a typical extrusion alloy. 6063 aluminum...

Alloy 8011 is a typical alloy for aluminum foil and which is currently the most widely used metal in our daily life. Properties such as its low weight, corrosion resistance, and easy maintenance of final product, have ensured that 8011 aluminum foil is widely applied in various field. For example,...

Alloy 8079 usually used to produce kinds of aluminum alloy foil, which offers the best properties for many applications with H14, H18 and other tempers and thicknesses between 10 and 200 microns. 8079 aluminum foil is a flexible and unique metal with soft temper and attractive surface. It is an...